Plywood Thickness Chart

See how common plywood labels such as 1/2 inch and 3/4 inch compare with typical manufactured thicknesses, including 15/32 and 23/32 sheathing.

Plywood Thickness Chart

U.S. plywood is often sold under a familiar inch label such as 1/2 inch or 3/4 inch, while the manufactured thickness may be a 32nd-inch size such as 15/32 or 23/32. Sanded panels are more likely to match the even-inch label. Structural sheathing is more often the slightly thinner 32nd-inch size. Measure the panel and read the grade stamp when the exact thickness matters.

Common label Typical manufactured thickness Metric (approx.) Common use
1/4 in 1/4 in (0.250 in); some panels about 7/32 in 6.4 mm (sometimes ~5.6 mm) Underlayment, crafts, cabinet backs
3/8 in or 11/32 in 3/8 in (0.375 in) or 11/32 in (0.344 in) 9.5 mm or 8.7 mm Wall sheathing, light projects; sheathing is often 11/32 in
1/2 in or 15/32 in 1/2 in (0.500 in) sanded, or 15/32 in (0.469 in) sheathing 12.7 mm or 11.9 mm Wall or roof sheathing, subfloors where specified
5/8 in or 19/32 in 5/8 in (0.625 in) sanded, or 19/32 in (0.594 in) sheathing 15.9 mm or 15.1 mm Subfloors and sheathing
3/4 in or 23/32 in 3/4 in (0.750 in) sanded, or 23/32 in (0.719 in) sheathing 19.1 mm or 18.3 mm Subfloors, shelves, workbenches, stair treads where specified
1-1/8 in 1.125 in 28.6 mm Some thicker subfloor / Sturd-I-Floor panels
A panel sold as “1/2-inch sheathing” is commonly 15/32 inch, and “3/4-inch sheathing” is commonly 23/32 inch. Sanded hardwood or sanded softwood plywood in the same nominal class may be a full 1/2 or 3/4 inch. The stamp on the panel is the authority, not the bin label alone.

OSB and Metric Panels

Oriented strand board (OSB) is sold in similar thickness classes, but common OSB sizes include 7/16 inch (about 11.1 mm), 15/32, 19/32, and 23/32 inch. Do not assume an OSB panel is the same thickness as a plywood panel with a similar name.

In the UK and much of Europe, sheets are usually labeled in millimetres. Common thicknesses are 6, 9, 12, 15, and 18 mm. These are close to, but not exact matches for, 1/4, 3/8, 1/2, 5/8, and 3/4 inch. If a project mixes U.S. and metric panels, measure both before you rely on a flush surface.

Standard Sheet Size

The usual U.S. sheet is 4 × 8 feet (48 × 96 inches). That is 32 square feet of coverage before cuts and overlap. 4×9 and 4×10 sheets are also sold, often for taller walls. Shop and specialty panels may come in smaller sizes, such as 2×4 or 4×4.

4x8 Sheet Count

Estimate how many standard 4×8 sheets you need for a given area. This is an area count only; it does not choose a thickness or a span rating.

Advertisement
Thicknesses on this page are typical retail and manufacturing values for common U.S. plywood and similar panels. Actual thickness, sanding allowance, and span rating vary by product and mill. The panel stamp and a physical measurement are the right sources for installation, and this chart is not a span table or structural specification.

Plywood Thickness FAQ

Is 1/2-inch plywood actually 1/2 inch thick?

Sanded plywood sold as 1/2 inch is often close to 0.500 inch. Structural sheathing sold as 1/2 inch is commonly 15/32 inch (about 0.469 inch).

What is the standard plywood sheet size?

The most common U.S. sheet is 4 × 8 feet (48 × 96 inches), which covers 32 square feet. 4×9 and 4×10 sheets are also sold.

What plywood thicknesses are commonly sold?

Common U.S. labels include 1/4, 3/8, 1/2, 5/8, and 3/4 inch, plus sheathing sizes such as 11/32, 15/32, 19/32, and 23/32 inch. Metric panels are often 6, 9, 12, 15, or 18 mm.

Does thickness tell me the span rating?

No. Two panels can share a thickness class and have different span ratings. Use the stamp on the panel (for example a roof/floor span rating) and the project specification, not thickness alone.

Advertisement