Board Foot Calculator

Convert thickness, width, and length into board feet. The default uses nominal size, which is how lumber is usually sold; you can also calculate the dressed volume.

Board Foot Calculator

Enter a common size or your own dimensions. Retail board-foot quantities are usually based on nominal size. Choose actual size to use typical dressed dimensions, such as 1.5 × 3.5 inches for a 2x4.

Advertisement

What Is a Board Foot?

A board foot (bd ft) is a volume measure used for lumber in the United States and Canada. One board foot is 144 cubic inches, which is the volume of a piece that is 1 inch thick, 12 inches wide, and 1 foot long. It is not a length, and it is not the same as a square foot of coverage.

The usual formula, when length is in feet, is:

Board feet = (thickness in inches × width in inches × length in feet) ÷ 12 × number of pieces

If the length is in inches, use (thickness × width × length) ÷ 144. Both versions describe the same volume: 144 cubic inches per board foot.

Worked Example: Ten 8-Foot 2x4s

For 10 pieces of 2x4 lumber, each 8 feet long:

  • Nominal size (typical retail board-foot count): (2 × 4 × 8) ÷ 12 = 5.333 board feet each, or 53.33 board feet for ten pieces.
  • Typical actual size (1.5 × 3.5 inches): (1.5 × 3.5 × 8) ÷ 12 = 3.5 board feet each, or 35 board feet for ten pieces.

Yards, invoices, and takeoff sheets almost always use the nominal method. Use the actual method when you need the dressed volume of the finished board, for example when comparing how much wood is really in the piece after surfacing.

Nominal Size Versus Actual Size

A commonly sold dry 2x4 measures about 1.5 × 3.5 inches, not 2 × 4 inches. The name is the nominal size. Softwood boards are typically surfaced after drying, so the finished thickness and width are smaller than the name suggests. Common actual sizes are listed on the lumber size chart.

Because board footage is a pricing and quantity unit, sellers generally calculate it from the nominal name: a 2x4 is entered as 2 × 4, a 2x6 as 2 × 6, and a 1x6 as 1 × 6. A 5/4 deck board is often entered as 1.25 inches thick by 6 inches wide, even though a typical dressed deck board is closer to 1 × 5.5 inches. If a supplier’s invoice uses different conventions, match the supplier’s method rather than this calculator.

This calculator is a planning reference for standard softwood dimension lumber. It does not account for waste, kerf, moisture, or special grading rules, and it is not a substitute for a supplier invoice or a construction takeoff. Always confirm how a yard or project prices board feet.

Board Foot FAQ

How do you calculate board feet?

Use (thickness in inches × width in inches × length in feet) ÷ 12, then multiply by the number of pieces. One board foot equals 144 cubic inches.

Do you use nominal or actual lumber size?

Retail board-foot totals are usually calculated from nominal sizes. Actual dimensions give the true dressed volume, which is smaller.

How many board feet are in a 2x4x8?

Nominal: 5.333 board feet. Typical actual size: 3.5 board feet.

Is a board foot the same as a square foot?

No. A square foot is area. A board foot is volume. A 1-inch-thick board that covers 1 square foot is 1 board foot, but a 2-inch-thick board covering the same area is 2 board feet.

Advertisement